Evc L2Cp Peer(Gg) - Planet WGSD-10020 Command Manual

<L2cpForwardList : 0~31>
Default:
N/A
Usage Guide:
To configure policy ID of L2CP forward
Example:
To configure policy 1 for L2CP forward for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # evc l2cp forward 1

4.2.65.22 evc l2cp peer(GG)

Command:
evc l2cp forward <L2cpPeerList : 0~31>
evc Ethernet Virtual Connections
l2cp Setup L2CP forwarding
peer Redirect L2CP frames to local protocol entity
<L2cpPeerList : 0~31>
Default:
N/A
Usage Guide:
To configure policy ID of L2CP peer
Example:
To configure policy 1 of L2CP peer for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # evc l2cp peer 1
Select BPDU addresses (0-15) and GARP addresses (16-31)
Select BPDU addresses (0-15) and GARP addresses (16-31)
-107-
Command Guide