S1 = 11: Follow-Up Controller Without Int/Ext Switching (Control System Coupling) - Siemens SIPART DR22 Manual

Manual
1.5.4.12 S1 = 11:
This follow-up controller is designed specially for the control system coupling. It differs from the
structure S1 = 3 in that the setpoint switching to w
control signals are available for locking the control system operation via the SES. With Int∨CB
the manual intervention via He
for this connection.
Disconnection of a cascade control is made by manual manipulation at the master controller.
The other functions are unchanged in relation to S1 = 3.
Figure 1-46 Block diagram S1=11 Follow-up controller for control system coupling
SIPART DR22 6DR2210
C79000-G7476-C154-03
Follow-up controller without Int/Ext switching
(control system coupling)
at S64 = 3 is suppressed. S64 = 3 is expressly recommended
ES
see fig. 1-50, page 90
see fig. 1-5, page 24
1.5 Functional description of the structure switches
1.5.4 Controller types (S1, S49 to S53)
via Int and CB is omitted and thus these
i
⋅
1 Technical Description
85