Siemens SIPART DR22 Manual page 25

Manual 1 Technical Description
1.5 Functional description of the structure switches
1.5.1 Analog input signal processing permanently connected
The function inputs FE1 and FE3 are preceded by a linearizer which enables non-linear process
variables to be displayed physically correctly (for operating method see chapter 1.5.2, page 25)
function block Fu, setting of the 13 vertex values, see chapter 1.5.4, figure 1-19, page 45 to
figure 1-23, page 46).
The outputs of the analog inputs AE1A to AEbA are now assigned to the function inputs FE1 to
FE12 by the structure switches S15 to S19 or S212 to S217. The outputs AE1A to AEbA and
the function inputs FE1 to FE12 are available for the assignment to analog outputs, the limit
value alarm and the parameter control and can be read through the SES. With this input
structure most control tasks can be solved in connection with the different controller types and
controller output structures.
23
SIPART DR22 6DR2210
C79000-G7476-C154-03