Structuring Mode Apst (All Preset, Factory Setting) - Siemens SIPART DR22 Manual

3 Operation
3.3 Configuring level (parameterization and structuring mode)

3.3.11 Structuring mode APSt (All Preset, factory setting)

3.3.11 Structuring mode APSt (All Preset, factory setting)
The structuring mode APSt serves to reset all controller functions (parameters and structures) to
the factory setting. We recommend you to run the APSt function first if major changes are to be
made to the configuration.
no
or
Answer
19
YES
Striped pattern
18
ID offline
Controlled 17
variable x
16
APSt
PS
14
(Parameterization/
structuring)
Figure 3-15 Control and display functions in the structuring mode APSt
No APSt appears after jumping to the structuring mode APSt with the Enter key. Set YES with +∆w
key (6.1) and press the Enter key (9) until the structuring preselection level appears with StrS. The
Preset function is run. Select structuring mode Strs by pressing the Enter key and re-structure the
controller.
210
SIPART DR22
100
C
Int
ST
A1
80
A2
SP--W
60
A3
A4
40
20
0 I
II
OUT-Y
SIEMENS SIPART DR22
13.2 13.1
no function
Internal LED: current status
1
Exit key ↗: Return to structuring
2
preselection level after APSt
3 Exit LED: flashes
4
Adaptation LED: off
6.1
Adjustment no or YES, set YES
6.2
8
Manual LED: ON (manual operation)
Enter key ↗: until structuring preselection level
9
Strs appears
Enter LED: flashes at YES and APSt
10
12
Shift key ↗: Continuous pressing switches
the process display to unsignaled
controller
11
Controller LEDs: steady or flashing light
signals displayed controller
Manual
SIPART DR22 6DR2210
C79000-G7476-C154-03