Ii-5-6 Active Directory/Ldap; Ii-5-6-1 General Setup - Draytek Vigor2862 Series User Manual

I I - 5 - 6 A c
I I - 5 - 6 A
Lightweight Directory Access Protocol (LDAP) is a communication protocol for using in TCP/IP
network. It defines the methods to access distributing directory server by clients, work on
directory and share the information in the directory by clients. The LDAP standard is
established by the work team of Internet Engineering Task Force (IETF).
As the name described, LDAP is designed as an effect way to access directory service without
the complexity of other directory service protocols. For LDAP is defined to perform, inquire
and modify the information within the directory, and acquire the data in the directory
securely, therefore users can apply LDAP to search or list the directory object, inquire or
manage the active directory.
I I - 5 - 6 - 1 G
I I - 5 - 6 - 1 G
This page allows you to enable the function and specify general settings for LDAP server.
Available settings are explained as follows:
Item
Enable
Bind Type
Server Address
Destination Port
Use SSL
Regular DN
Regular Password
208
t i v e D i r e c t o r y / L D
c t i v e D i r e c t o r y / L D
e n e r a l S e t u p
e n e r a l S e t u p
Description
Check to enable such function.
There are three types of bind type supported.



For the regular mode, you'll need to type in the Regular DN
and Regular Password.
Enter the IP address of LDAP server.
Type a port number as the destination port for LDAP server.
Check the box to use the port number specified for SSL.
Type this setting if Regular Mode is selected as Bind Type.
Specify a password if Regular Mode is selected as Bind Type.
A P
A P
Simple Mode – Just simply do the bind authentication
without any search action.
Anonymous – Perform a search action first with
Anonymous account then do the bind authentication.
Regular Mode– Mostly it is the same with anonymous
mode. The different is that, the server will firstly check
if you have the search authority.
Vigor2862 Series User's Guide