Ii-1-2-14 Details Page For Ipv6 - Tspc In Wan1/Wan2/Wan3/Wan4 - Draytek Vigor2862 Series User Manual

WAN Connection
Detection
RIPng Protocol
Below shows an example for successful IPv6 connection based on PPP mode.
Info
I I - 1 - 2 - 1 4
I I - 1 - 2 - 1 4
Tunnel setup protocol client (TSPC) is an application which could help you to connect to IPv6
network easily.
Please make sure your IPv4 WAN connection is OK and apply one free account from hexago
(http://gogonet.gogo6.com/page/freenet6-account ) before you try to use TSPC for network
connection. TSPC would connect to tunnel broker and requests a tunnel according to the
specifications inside the configuration file. It gets a public IPv6 IP address and an IPv6 prefix
from the tunnel broker and then monitors the state of the tunnel in background.
After getting the IPv6 prefix and starting router advertisement daemon (RADVD), the PC
behind this router can directly connect to IPv6 the Internet.
110
Such function allows you to verify whether network
connection is alive or not through Ping Detect.
Mode – Choose Always On or Ping Detect for the system to
execute for WAN detection. Always On means no detection
will be executed. The network connection will be on always.


RIPng (RIP next generation) offers the same functions and
benefits as IPv4 RIP v2.
At present, the IPv6 prefix can be acquired via the PPPoE mode connection which is
available for the areas such as Taiwan (hinet), the Netherlands, Australia and UK.
D e t a i l s P a g e f o r I P v
D e t a i l s P a g e f o r I P v
Ping IP/Hostname – If you choose Ping Detect as
detection mode, you have to type IP address in this field
for pinging.
TTL (Time to Live) –If you choose Ping Detect as
detection mode, you have to type TTL value.
6 T S P C i n W A N 1
6 T S P C i n W A N 1
–
–
/ W A N 2 / W A N 3 / W A N
/ W A N 2 / W A N 3 / W A N
Vigor2862 Series User's Guide
4
4