Ii-2-1-5 Advanced Dhcp Options - Draytek Vigor2862 Series User Manual

After making changes on the Advance setting page, click the OK button to retain the changes
and return to the LAN IPv6 Setup page. Be sure to click OK on the LAN IPv6 Setup page or else
changes made on the Advance setting page will not be saved.
I I - 2 - 1 - 5 A
I I - 2 - 1 - 5 A
DHCP Options can be configured by clicking the DHCP Server Option button on the LAN
General Setup screen.
Available settings are explained as follows:
Item
Customized List
Enable
Interface
Vigor2862 Series User's Guide
selected, the router will determine the MTU value for LAN.
RIPng Protocol –RIPng (RIP next generation) offers the same
functions and benefits as IPv4 RIP v2.
Extension WAN – In addition to the default WAN used for
IPv6 traffic specified in the WAN Primary Interface in the LAN
IPv6 Setup page, additional WANs can be selected to carry
IPv6 traffic by enabling them in the Extension WAN section.
Available WAN – Additional WANs available but not currently
selected to carry IPv6 traffic.
Selected WAN – Additional WANs selected to carry IPv6
traffic.
d v a n c e d D H C P O p
d v a n c e d D H C P O p
Description
Shows all the DHCP options that have been configured in the
system.
If selected, DHCP option entry is enabled.
If unselected, DHCP option entry is disabled.
LAN interface(s) to which this entry is applicable.
t i o n s
t i o n s
159