Draytek Vigor2862 Series User Manual page 63

Cancel
3. Please type in the IP address information originally provided by your ISP. Then click Next
for next step.
4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system
status of this protocol will be shown.
5. Now, you can enjoy surfing on the Internet.
E t h e r n e t
E t h e r n e
1. Choose WAN2 as the WAN Interface and choose Ethernet as the Physical Mode. Click
the Next button. The following page will be open for you to specify Internet Access
Type.
2. Click DHCP as the Internet Access type. Simply click Next to continue.
Vigor2862 Series User's Guide
W A N 2 - D H C P
t W A N 2 - D H C P
Click it to give up the quick start wizard.
47