Draytek Vigor2862 Series User Manual page 769

This command allows you to configure user-defined CPE vendor ID.
S y n t a x
S y n t a x
adsl vendorid [status/on/off/ set vid0 vid1]
S y n t a x
S y n t a x
Parameter
status
on
off
set vid0 vid1
E x a m p l
E x a m p
> adsl vendorid status
% User define CPE Vendor ID is OFF
% vid0:vid1 = 0x00fe7244:79612f21
> adsl vendorid on set vid0 vid1
% User define CPE Vendor ID is ON
T e l n e t C o m m
T e l n e t C o m m
This command can set QoS parameter for ATM.
S y n t a x
S y n t a x
adsl atm pcr [pvc_no][PCR][max][status]
adsl atm scr [pvc_no][SCR]
adsl atm mbs [pvc_no][MBS]
adsl atm status
S y n t a x
S y n t a x
Parameter
pvc_no
PCR
max
SCR
MBS
status
E x a m p l
E x a m p
> adsl atm pcr 1 200 max
% PCR is 200 for pvc 1.
> adsl atm pcr status
pvc
---------------------------
Vigor2862 Series User's Guide
D e s c r i p t i o n
D e s c r i p t i o n
Description
Display current status of user-defined vendor ID.
Enable the user-defined function.
Disable the user-defined function.
It means to set user-defined vendor ID with vid0 and vid1.
The vendor ID shall be set with HEX format, ex: 00fe7244: 79612f21.
e
l e
a n d : a d s l a t m
a n d : a d s l a t m
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means pvc number and must be between 0(Channel 1) to
7(Channel 8).
It means Peak Cell Rate for upstream.
The range for the number is "1" to "2539".
It means to get the highest speed for the upstream.
It means Sustainable Cell Rate.
It means Maximum Burst Size.
It means to display PCR/SCR/MBS setting.
e
l e
channel PCR
753