Page 4
Declaration of Conformity Hereby, DrayTek Corporation declares that the radio equipment type Vigor2865 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://www.draytek.com.tw/ftp/Vigor2865/Document/CE/ Manufacturer: DrayTek Corp. Address: No.
Page 5
20cm between the radiator & your body. The antenna/transmitter should be kept at least 20 cm away from human body. DrayTek Vigor2865 series VDSL2/ADSL2+ routers are compliant with 47 C.F.R. Part 68. More update, please visit www.draytek.com. *The external power supply used for each product will be model dependent.
Take a look at the package content. If there is anything missed or damaged, please contact DrayTek or dealer immediately. Besides, the content is subject to the real package. Vigor router Antenna + Socket (L models) RJ-45 to RJ-45 Cable...
Status Explanation The router is powered off. Blinking The router is powered on and running normally. WAN2 Internet connection is ready. Internet connection is not ready. Blinking The data is transmitting. The QoS function is active. The QoS function is inactive. LTE device is connected and ready for use.
Page 9
Right The port is connected with 1000Mbps. The port is connected with 10/100Mbps. Left The port is connected. The port is disconnected. P1~P5 Blinking The data is transmitting. Right The port is connected with 1000Mbps. The port is connected with 10/100Mbps. The port “WAN2 / P6”...
Status Explanation The router is powered off. Blinking The router is powered on and running normally. WAN2 Internet connection is ready. Internet connection is not ready. Blinking The data is transmitting. The QoS function is active. The QoS function is inactive. USB device is connected and ready for use.
Page 11
WLAN: Wireless access point is ready. Wireless function is disabled. It will blink slowly while wireless traffic goes Blinking through. ACT and WLAN LEDs blink quickly and simultaneously when WPS is working, and will return to normal condition after two minutes. (You need to setup WPS within 2 minutes.) The DMZ function is enabled.
Page 12
Interface Description Wireless LAN Wireless band will be switched /changed according to the ON/OFF/WPS button pressed and released. For example, 2.4G (On) and 5G (On) – in default. 2.4G (Off) and 5G (On) – pressed and released the button once.
Page 13
LAN P1-P5 Connecters for local network devices. Connecter for accessing the Internet. Connecter for installing WLAN antennas. (For ac/ax model). Connecter for a power adapter. ON/OFF Power Switch. Connecter for installing LTE antennas. (For L model). SIM 1 or SIM 1/2 Slot for installing SIM card.
Status Explanation The router is powered off. Blinking The router is powered on and running normally. WAN2 Internet connection is ready. Internet connection is not ready. Blinking The data is transmitting. The QoS function is active. The QoS function is inactive. USB device is connected and ready for use.
Page 15
Right The port is connected with 1000Mbps. The port is connected with 10/100Mbps The port “WAN2 / P6” is switchable. It can be used for LAN connection or WAN connection according to the settings configured in WUI. Interface Description Wireless LAN Wireless band will be switched /changed according to the ON/OFF/WPS button pressed and released.
This section will guide you to install the router through hardware connection and configure the router’s settings through web browser. Before starting to configure the router, you have to connect your devices correctly. (For the hardware connection, we take “ac” model as an example.) Connect the DSL interface to the land line jack with a DSL line cable, or Connect the cable Modem/DSL Modem/Media Converter to the WAN port of router with Ethernet cable (RJ-45).
Vigor router has keyhole type mounting slots on the underside. A template is provided on the Vigor router packaging box to enable you to space the screws correctly on the wall. Place the template on the wall and drill the holes according to the recommended instruction.
To access Internet, please finish basic configuration after completing the hardware installation. The Quick Start Wizard is designed for you to easily set up your router for Internet access. You can directly access the Quick Start Wizard via Web Configurator. Make sure your PC connects to the router correctly. Note You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be the same...
Page 19
Now, the Main Screen will pop up. Click Wizards>>Quick Start Wizard. Note The home page will change slightly in accordance with the router you have. Here we take Vigor2865ac as an example. If your router can be under an environment with high speed NAT, the configuration provide here can help you to deploy and use the router quickly.
Page 20
On the next page as shown below, please select the WAN interface that you use. If DSL interface is used, please choose WAN1; if Ethernet interface is used, please choose WAN2; if wireless 2.4G/5G connection is used, please choose WAN3 or WAN4; if 3G USB modem is used, please choose WAN5 or WAN6. Then click Next for next step.
Page 21
Choose WAN1 as WAN Interface and click the Next button; you will get the following page. After finished the above settings, simply click Next.
Page 22
Please manually enter the Username/Password provided by your ISP. Then click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet.
Page 23
Choose WAN1 as WAN Interface and click the Next button; you will get the following page. Please type in the IP address/mask/gateway information originally provided by your ISP. Then click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown.
Web registration is preferred. You can register your Vigor router via http://www.draytek.com. & & Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents. http://www.draytek.com...