Iv-1-4-2 Digit Map - Draytek Vigor2862 Series User Manual

I V - 1 - 4 - 2
I V - 1 - 4 - 2
For the convenience of user, this page allows users to edit prefix number for the SIP account
with adding number, stripping number or replacing number. It is used to help user have a quick
and easy way to dial out through VoIP interface.
Available settings are explained as follows:
Item
Enable
Match Prefix
Mode
336
D i g i t M a p
D i g i t M a p
Description
Check this box to invoke this setting.
It is used to match with the number you dialed and may be
modified by the action (add, strip or replace) with the OP
Number.
None - No action.
Add - When you choose this mode, the OP number will be
added before the match prefix number for calling out
through the specific route.
Strip - When you choose this mode, the partial or whole
match prefix number will be deleted according to the OP
number. Take the above picture (Prefix Table Setup web
page) as an example, the OP number of 886 will be deleted
completely for the match prefix number is set with 886.
Replace - When you choose this mode, the OP number will
be replaced by the prefix number for calling out through
the specific VoIP interface. Take the above picture (Prefix
Table Setup web page) as an example, the prefix number of
03 will be replaced by 8863. For example: dial number of
"031111111" will be changed to "88631111111" and sent to
SIP server.
Vigor2862 Series User's Guide