Vii-1-4 User Password - Draytek Vigor2862 Series User Manual

Administrator LDAP
Setting
When you click OK, the login window will appear. Please use the new password to access into
the web user interface again.
V I I - 1 - 4 U
V I I - 1 - 4
This page allows you to set new password for user operation.
Available settings are explained as follows:
Item
Enable User Mode for
simple web configuration
486
s e r P a s s w o r d
U s e r P a s s w o r d
selected SMS profile and Mail profile.
Add – After typing the user name and password above,

simply click it to create a new local user. The new one
will be shown on the Local User List immediately.
Edit – If the username listed on the box above is not

satisfied, simply click the username and modify it on
the field of User Name. Later, click Edit to update the
information.
 Delete – If the local user listed on the box above is not
satisfied, simply click the username and click Delete to
remove it.
Use only advanced authentication method for Admin

"WAN" login – Advanced authentication method can
offer a more secure network connection. In general,
the above basic password setting will be used for
authentication if such option is disabled. Simply check
the box to enable the following settings.
Enable LDAP/AD login for admin users – If it is enabled, any
user can access into the web user interface of Vigor router
through the LDAP server authentication.
Available profiles will be displayed here under the link of
LDAP Profile Setup. To create a new profile, simply click the
link of LDAP Profiles Setup.
Description
After checking this box, you can access into the web user
interface with the password typed here for simple web
configuration.
The settings on simple web user interface will be different
with full web user interface accessed by using the
Vigor2862 Series User's Guide