Ii-2-1-4 Details Page For Lan Ipv6 Setup - Draytek Vigor2862 Series User Manual

I I - 2 - 1 - 4 D
I I - 2 - 1 - 4 D
There are two configuration pages for LAN1/LAN2/LAN3/LAN4/LAN5/LAN6/LAN7/LAN8/DMZ
Port, Ethernet TCP/IP and DHCP Setup (based on IPv4) and IPv6 Setup. Click the tab for each
type and refer to the following explanations for detailed information. Below shows the
settings page for IPv6.
It provides 2 daemons for LAN side IPv6 address configuration. One is SLAAC(stateless) and
the other is DHCPv6 (Stateful) server.
Available settings are explained as follows:
Item
Enable
WAN Primary Interface
Static IPv6 Address
156
e t a i l s P a g e f o r L A N
e t a i l s P a g e f o r L A N
Description
Check the box to enable the configuration of LAN 1 IPv6
Setup.
Use the drop down list to specify a WAN interface for IPv6.
IPv6 Address –Type static IPv6 address for LAN.
I P v 6 S e t u p
I P v 6 S e t u p
Vigor2862 Series User's Guide