Draytek Vigor2862 Series User Manual page 284

Routing Usage LAN

I P R o u t e
I P R o u t e
1. Go to LAN >> General Setup, click on Details Page for IP Routed Subnet.
2. Set up TCP/IP details for IP Routed Subnet.
a. Enable IP Routed Subnet.
b. Enter the IP Address for the router. Note that this could be the same as router's WAN
c. Enter the Subnet Mask according to ISP.
3. For the host behind Vigor Router to obtain the public IP address, we may:
a. Configure a fixed IP/Subnet Mask on the host
b. Set up DHCP IP Pool, enable Use LAN Port, and connect the host to the router on the
268
d L A N S e t u p
d L A N S e t u p
IP.
specified LAN port (which is port 1 and 2 in this example)
Vigor2862 Series User's Guide