Vii-2-2 Bandwidth Limit - Draytek Vigor2862 Series User Manual

V I I - 2 - 2 B
V I I - 2 - 2
In the Bandwidth Management menu, click Bandwidth Limit to open the web page. To
activate the function of limit bandwidth, simply click Enable and set the default upstream
and downstream limit.
Available settings are explained as follows:
Item
Enable / Disable
Limitation List
Specific Limitation
Vigor2862 Series User's Guide
a n d w i d t h L i m i t
B a n d w i d t h L i m i t
Description
Enable - Click this button to activate the function of limit
bandwidth.
Disable - Click this button to close the function of limit
bandwidth.
Default TX limit - Define the default speed of the upstream
for each computer in LAN.
Default RX limit - Define the default speed of the
downstream for each computer in LAN.
Display a list of specific limitations that you set on this web
page.
IP – All the IPs within the range defined will be restricted by
bandwidth limit defined by TX Limit and RX Limit below.
Start IP - Define the start IP address for limit

521