Oki ES9466 Manual page 44

2.PLACING ORIGINALS
When there are too many originals to be scanned at one time, divide the originals into several sets before copying.
Place the first set of the originals and then press [Continue] on the touch panel while the data of this set are being
scanned. When this scanning is finished, place the next set of the originals and press the [START] button on the control
panel. (If you press [Continue], this button may not work shortly before scanning is finished.)
Continuous feed mode (copy)
The feeding mode is set at "continuous feed mode" by default. Once you set the originals and then press the [START]
button, they are scanned page by page continuously. It is useful when you want to scan more than one original at one
time.
For how to set the feeding mode, refer to the Copying Guide. The way of placing originals is the same as Scan/Fax.
 P.43 "Scanning originals with the ADF at copying"
Single feed mode (copy)
When the feeding mode is set at "single feed mode", an original is fed automatically as it is placed on the ADF. It is
useful when you want to scan only 1 original sheet.
For how to set the feeding mode, refer to the Copying Guide. Follow the procedures below to place paper.
1 Align the side guides to the original length.
Insert the original with its face up and straight along the side guides.
2
The original is automatically pulled in and then the menu of step 3 will be displayed on the touch panel.
Be sure to let go of the original when it starts being pulled.
44 Placing Originals