Oki ES9466 Manual page 12

1.LOADING PAPER
3 Place paper in the tray.
 The maximum number of sheets that can be loaded in a tray differs depending on your model. Be sure that the
height of the stacked paper does not exceed the line indicated inside of the side guides. For the maximum
number of sheets that can be loaded, refer to the Specifications Guide.
 If paper cannot be fed, printing takes a long time after feeding or the quality is poor, turn over the paper and
place it again.
When placing 320 mm x 450 mm paper, etc.
When placing the following sizes of paper in the second tray, the Paper Feed Pedestal, or the
Additional Drawer Module, remove the green guides 1 and 2, and then insert them in the front pocket
of the tray.
 305 mm x 457 mm
 320 mm × 450 mm
 320 mm × 460 mm
 12" × 18"
12 Loading Paper in Trays