Oki ES9466 Manual page 16

1.LOADING PAPER
3 Load paper in the tray.
Load paper with its face up.
Load an envelope with its bottom side at the rear and its flap side at the front. If the flap of the envelope touches
the side guide, fold the flap and load the envelope.
 Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides.
For maximum number of sheets to be loaded, refer to the Specifications Guide.
 Printing may be uneven depending on the envelope types.
 If printing is uneven or if paper jamming occurs, try the following:
- Place fewer sheets.
- Expel any air inside the envelope.
- Flatten a fold of the envelope.
While holding the green lever of the side guide in the direction of the arrow, set the side guide to
4
the paper size.
Adjust the side guides with both hands.
Move the end guide to the trailing edge of the paper while pushing its lower part in the direction
5
of the arrows.
16 Loading Paper in Trays