Siemens SIRIUS 3RW52 Manual page 87

Note
If you do not press any key at all for more than 10 seconds in programming mode, the device
automatically terminates programming mode and reverts to normal operation.
Tip
Alternatively, output 13 / 14 may also be set in the "Parameters > Soft Starter > ON / RUN
relay output" menu of the 3RW5 HMI High Feature (accessories).
SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
5.7 Parameterizing output 13 / 14 (output signal ON or RUN)
Parameter assignment
87