Siemens SIRIUS 3RW52 Manual page 78

Parameter assignment
5.1 Setting elements on the 3RW52 soft starter
①
②
③
④
⑤
⑥
⑦
⑧
⑨
Prerequisite for adjusting the setting elements
● Slotted screwdriver or cross-tip screwdriver PZ1
Procedure
Note
Display of setting elements.
Please note that the displays on the setting elements are approximate values which are
subject to production engineering tolerances.
To perform a detailed setting, a 3RW5 HMI should be used.
● Insert the slotted screwdriver in the opening of the setting element.
● Turn the slotted screwdriver until the arrow of the setting element points to the required
parameter setting.
78
CLASS setting for motor overload protection
Rated operational current I
Current limiting factor as a multiple of the set rated operational current I
Ramp-up time
Starting voltage
Ramp-down time
MODE key
Parameterization of RESET MODE
•
Deactivation / activation of Soft Torque
•
Parameterization of ON / RUN relay output
•
Scale of rated operational current I
RESET / TEST key
Acknowledges faults
•
Performs the user test
•
Parameterization of ON / RUN relay output
•
of the motor
e
of the motor
e
Manual, 01/2019, A5E35630451002A/RS-AD/004
of the motor
e
SIRIUS 3RW52 Soft Starter