Siemens SIRIUS 3RW52 Manual page 51

● Remove the protective film from the adhesive tape on the seal and secure the seal on the
rear side of the 3RW5 HMI High Feature
Ensure that the seal does not overlap.
● Place the 3RW5 HMI High Feature in the cutout of the control cabinet door
● Continue to screw the screws into the fixing brackets
at the front. Fasten the fixing brackets onto the 3RW5 HMI High Feature
● Tighten the 3RW5 HMI High Feature with a tightening torque of 0.3 ... 0.35 Nm
Ensure that all of the screw heads are in contact with the fixing bracket.
Ensure that the fixing brackets with marking "002" are used.
SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
3.4 Installing / mounting / removing 3RW5 HMI
①
.
③
until they protrude approx. 8 mm
Mounting and dismantling
②
.
④
.
⑤
.
51