Siemens SIRIUS 3RW52 Manual page 54

Mounting and dismantling
3.4 Installing / mounting / removing 3RW5 HMI
Note
Locking switch.
Make sure that the locking switch on the rear of the 3RW5 HMI Standard is in the required
position.
For more information, see Chapter Standard 3RW5 HMI (Page 105).
● Connect the connecting cable of the 3RW5 HMI Standard to the 3RW52 soft starter.
● Insert the push-in lugs into each side of the enclosure until you hear them engage
fix the 3RW5 HMI Standard on the wall
54
② ③
+ .
Manual, 01/2019, A5E35630451002A/RS-AD/004
①
and
SIRIUS 3RW52 Soft Starter