Advertisement
56
SICAM Q80 7KG8080
5.1.2.3.7 LED indicator SICAM Q80 7KG8080
The LED functions are permanently allocated:
5.1.2.3.8 Modbus TCP
SICAM Q80 7KG8080 is able to send transmit system information via the Interface Modbus TCP.
Activating and making settings for the ports for Modbus TCP
Up to a maximum of 3 ports can be activated, where Port 1 is set permanently to the address 502.
A brief description of the protocol's structure, as well as a table of the Register assignments is provided under
Communication via Modbus TCP
5.1.2.3.9 Supplementary parameters
Under "Additional parameters", you will find the tolerance ranges for data reduction and the parameterization of the
message transmission (see Chapter
recorded.
Expert insight into SICAM Q80 7KG8080's data processing methods is required for the purpose of making changes to
this page, since any changes would render with the EN50160 standard void. Furthermore, the resulting data volume
will be strongly affected– see e.g. Instruction manual section Computations\Memory management \ Aggregation
intervals.
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
Interpretation of the LEDs
.
79
Messaging
). Optionally, the plot of the RMS-values' min/max points is
220
Advertisement
