Advertisement
A detailed description is provided in the appendix under
Acquisition interval: =Available options include Acquisition interval (according to
weekly which includes the day of the weenk and the clock time and finally daily with the clock time.
further criteria: Here you can limit the evaluation to recently captured measurements. Additionally, ignore intervals
smaller than enables short test measurements to be disregarded.
Reference
The automated report can also be generated by means of the program
located in the same program group as <SICAM Q80 Manager>.
6.3.4.1.6 Options - Output
6.3.4.1.6.1 Print
This dialog is for setting parameters for the printout process. SICAM Q80 Manager uses the device defined as the
standard printer in the Windows system. Thus, the printer's settings can be made directly as part of the Windows
settings.
Special settings for printout of the measured data by SICAM Q80 Manager:
Always show print preview on top
With the help of the SICAM Q80 7KG8080 Report Generator, you can compose printed reports incorporating
data curves, texts and other external data and images.
For ease of using Drag & Drop to deposit the measured data on the printout, the Report Generator can be kept
in the foreground without being covered over and over again by the SICAM Q80 Manager application (e.g. in the
maximized mode).
Plots data curve as a line with symbols
If multiple measurement curves are to be printed on one page, different symbols can be used to differentiate the
curves' data.
Alternatively to using symbols, it's possible to use a color printer.
Note
The summarization and evaluation of data applies across individual measurement
intervals.
For this reason, the data are saved on the PC/Server at the interval defined,
independently of the conclusion of the measurement on the device. If there are gaps in
the measurement, there is no summarizaton of the values.
Example:
Setting 24-hour intervals for retrieval of measured data once per day
Analysis and report composition is performed on a weekly basis
Operation of the Software
Autoreport
.
148
measurement cycles
Autoreport
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
179
set),
60
. This programs is
148
Advertisement
