Advertisement
The device must log itself in with an Internet provider. The provider's dial-up number is entered in the box Provider /
Number.
Internet access also requires a login name and password. These values are entered in the boxes Provider / Login
Name and Provider / Password.
If an email is sent via the LAN interface, then the entries pertaining to the Internet provider are omitted, of course.
However, the mail server by which the email is to be sent must always be specified. The mail server can be specified
either by its IP-address or by its host name. These are entered in the boxes SMPT / Server name or SMPT / Server
Address.
To prevent abuse (spam), almost every mail server requires logging in user name and password. The servers carry
out an ID check according to a variety of protocols, of which one supported by the server used must be selected in the
box SMTP / Authentication: login or cram-md5 (password encrypted).
If the mail server demands a login, the login name and password are entered in the boxes SMTP / Login Name and
SMT / Password respectively. Otherwise, these entries are omitted.
7.2.4.3.1 Example for eMail in response to a power outage:
04.04.2005 11:21:42
Device: SICAM Q80 7KG8080_121166
A voltage event has occurred!
Type:
3 (1=overvoltage, 2=sag, 3=outage)
Channels:
2
F
= 50.072 Hz
U1_rms = 227.63 V
U2_rms = 0.00 V
U3_rms = 227.62 V
THD U1 = 1.664 %
Free memory: 487156.00 kB
(This event :2 Unable to send:0 )
(All messages:23 Unable to send:0 Overflow:0)
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
Extras
227
Advertisement
