Advertisement
7.2.4
Configuration
7.2.4.1
General
Configuration of messages is performed with the help of the Events page.
The available message types are:
FAX
Events which can trigger a message:
1. voltage event,
2. free memory on a hard drive falls below a certain amount,
3. sending of a message within an interval set to between 1..24 hours.
First a definition must be made of when SICAM Q80 7KG8080 is to transmit a message. Transmission may be desired
at regular intervals, or in response to specific conditions. To determine this, the corresponding checkmarks must be
set under the heading Communications on the page Events. There is a button Init... for the respective message
transmission triggering option which becomes active when the option is selected. Clicking on this button calls the
dialog Configure event message for the respective transmission option used to configure the messages.
7.2.4.2
FAX
With a fax, just the fax machine's telephone number provides all data necessary for actually sending the message.
You must only be sure to include any digits necessary to obtain a dialing tone, or any area codes.
Example:
Note that both your modem and your fax machine must support the standard G3-Fax Version 2 or 2.0. However, this
is usually the case anyway.
SMS
Email
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
Extras
225
Advertisement
