Advertisement
178
SICAM Q80 7KG8080
Database search results
Retained search results:
Number of results lists to remember/ display.
In the left window, the measurement channels of the last n searches are displayed. The respective oldest
result is deleted when the maximum amount has been reached.
Maximum number of entries per result
Maximum number of search results to list. If more than m channels are found, the search for m results is
aborted.
Often, a high amount of results is caused by a search question which is too general, and not a desirable
outcome. Additionally, the processing time is increased along with the demands on system resources.
Display only measurement locations with measured data: Measurement locations without measured data will not
be listed.
Automated report
The Automated report enables cyclical evaluation of the data from the measurement device connected.
Transfer folder
Temporary folder for measured data. This folder can also be a network folder. After processing, measured
data and the report composed are saved in the
possess writing authorization for this folder!
With delete imported files, the data are deleted from the Transfer folder as soon as they are saved to the
measurement database.
Evaluation standard: Selects the standard used in making the calculation. In the selection box, the same templates
are listed as the ones created for the normal
Automatic correction (Flagging):
Set the evaluation schedule: Starts the WINDOWS Task-Planner. Add the call for the Automated Report here:
InstallationPath\SICAMQ80Manager.exe /R, e.g. "C:\SIEMENS\SICAM Q80 Manager\SICAMQ80Manager.exe /R".
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
measurement database
evaluation
112
Automatic correction according n
. Note that the user must
133
.
orm IEC 61000-4-30.
115
Advertisement
