Advertisement
Important Note
Always provide a unique name for a measurement assignment. If a device's measurement
assignment is copied to another device, the folder path is identical for both devices. In the analysis
of all devices, any measured results with the same designation would overwrite each other.
Analysis database: Folder for storing the database for administering the measurements and analysis performed.
The maximum file size for a database is currently 2GByte. For instance, if test measurements with many triggers
are carried out, it may be necessary to change databases (more than 1 000 000 events).
Important Note
If the database is used by multiple PCs, ensure that all the PCs use the same software version.
Otherwise, the database will always be converted to the newest version and access will no longer
be possible with any older version.
Export of data, print layouts to: Folder for the storage of various temporary files. (Storage of reports, export of curve
windows)
Device definition: Folder in which the device definitions are saved. If multiple devices are being controlled by
different PCs, iit is advantageous for all PCs to access one single list of the device pool.
Note: Newly added devices are displayed on the other PCs only after restarting the software SICAM Q80 Manager.
Path reference: The database contains the base directory path for the measured data. When you access this
database, then from the standpoint of your PC the data are on a different drive. Using this dialog, you can set up a
link between these paths. Example:
PC1:
Database path:
Data path:
In the database there is a reference to the current data path "C:\Documents\Data"
PC 2:
DB path, new:
Data path, new:
Since the database is still referring to the original path "C:\Documents\Data", you must make a line of
the following type:
Original path:
New path:
All data which have a database reference to : "C:\Doc..\All Users\Documents\SICAM\Test\Data"
are searched for in "\\MyNetwork\MyCompany\Saving\Data".
Changing to a different folder
Select the folder to change
Enter a new path. The change once applied will be displayed in the list. When the dialog is closed with OK,
the existence of the folders is verified.
By clicking on the button Browse.... In the folder dialog which then appears, it's possible to set up a new path.
"C:\Documents\DB"
"C:\Documents\Data"
//MyPC/DB"
"//MyPC/Data"
"C:\Documents\Data"
//MyPC/Data"
Operation of the Software
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
175
Advertisement
