Advertisement
Operation modes and settings
143
Add device
Here, manually enter the devices whose data are to be automatically transfered. The definitions for devices which are
integrated via
UDP
is performed automatically.
146
Auto-Transfer Devices: Manually enter the devices whose data are to be automatically transfered
Properties: Under Properties you set the IP-address and enter its Name and Serial number and activate the transfer
by means of Status.
Transfer Automatic: The transfer can be set separately for each device. The beginning of the transfer is set using
Interval start. For the Interval, the available settings range from 10 min to 1 week. Additionally, there is the option of
using a user defined interval. For devices which were integrated via UDP, the entry UDP Autotransfer is provided.
Data filter: Older data can be ignored by means of Data option - Data since... .
Error sequence: If the connection fails, it is possible to provide Connection retries at a specified Interval.
IP- Address: With certain constellations, e.g. Modem, it is possible for the IP-address imported via UDP not to match
the measurement device's address. In this case, enter the IP-address manually and lock it by clicking ont he padlock
button.
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
Advertisement
