Advertisement
136
SICAM Q80 7KG8080
Key to dialog elements:
1. List of all available measurements, sorted by measurement location, measurement task name, time of
measurement; use All
2. List of limit value sets, all defined limits; use All
3. List of limit values, all quantities to be calculated as per the standard 50160
4. Search criteria – the following criteria can be set:
a. a time frame,
b. value range for the measurement data (see
c. the conductor L1..L4 to find,
d. selection of the harmonics ranges for upper harmonics (see
e. compliance or non-compliance with standards and percentage of values beyond standards limits.
E.g. search of all frequency measurements, where at least 0.5 % of the measured values exceed the
standard
5. Search results – List of all measurement channels found:
a. limit value
b. Out of bounds
c. MID
d. Location
e. measurement task
f. Measurement
g. Min/Maxima
h. Conductor
i. Amount
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
to select all measurements
Selecting data folders
Name of limit value
Percentage of measured data lying outside of the limits
ID of the measurement, appended to limit name for better distinctions
Measurement location
Name of measurement task
Measurement designated by its starting time
Extreme values in waveform
Number (1..3) of conductor
percentage of measurement values accounted for in evaluation
to select all sets
)
109
Selecting data folders
),
109
Advertisement
