Advertisement
148
SICAM Q80 7KG8080
5.1.7.2
Autoreport
The program Autoreport evaluates in the background the data delivered by the program Auto-Transfer. New data are
imported and depending on the settings, a report is generated cyclically for each measurement location. Import of the
data conforms to the procedure on the page
database
. This means that these data are available for evaluation and display.
174
The settings correspond to the
Evaluation.
The evaluation is conducted according to defined value limits (the setting for the standards is EN 50160). The reports
are composed in PDF-format. This corresponds to performing the evaluation manually on the page
report
.
115
-
Start of the automatic data import and report can be performed by
the program Auto-Transfer, once new data have been transferred from the device
o
cyclically by the Windows Task Manager
o
the Start menu item Run
o
-
Ending the program Auto-Transfer is performed
once all data have been imported and no new data have been transferred for 5 minutes
o
by the user
o
The call is made by means of the
Task Planner
.
150
In the Topology, you can evaluate the automatically generated results. The possibilities have already been explained
under
Topology / Devices
Note
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
Data transfer
evaluation options
Autoreport Status: Display only - no configuration
Auto-Transfer
.
21
The computations to be performed can take extensive time, especially when there are many
monitoring devices. It is recommended that the Autoreport make use of the Windows Task
Planner to always start whenever there are no other tasks.
, where there is also entry into the
106
belonging to SICAM Q80 Manager under Extras \ Options \
177
as soon as new data have been transferred, or by the
142
measurement
Network quality
Windows
Advertisement
