MULTIQUIP GLOBUG GBX24S Operation Manual page 33

Location
L1 Cable Gland
L2 Lampstand Hinge Joint Damaged?
L3 Nut
L4 Actuator
Lamp
L5 Lamp Mounting Spindle Not spinning smoothly?
L6 LED Lamp
L7 Polycarbonate Cover
M1 Pulley, Top of Winch
M2 Wire Rope
M3 Winch Brake
M4 Mast Locking Shackle
Mast
M5 Safety Stopper
M6 Mast Rotation
M6 Mast Rotation
M7 Mast Nut
v - Daily Check
GBX24S/GBX24B LIGHT TOWER • OPERATION AND PARTS MANUAL — REV. #0 (05/30/19) — PAGE 33
Table 6. Lamp/Mast Maintenance
Part
Loose?
Too loose or too tight?
Not working properly?
Lamp burned or damaged?
Dirty or Cracked?
Does not slide smoothly?
Damaged, rusty, frayed?
Defective?
Does not operate properly?
Loose wire rope and stopper
jutting out?
Lock knob not working properly? Replace knob.
Mast does not rotate smoothly? Apply grease.
Missing or damaged nut?
n - Every 20 Hours
Symptom
l - Every 100 hours
MAINTENANCE
Solution
Screw tightly.
Repair.
Tighten correctly.
Replace.
Apply grease.
Replace.
Wipe off dirt or
replace.
Apply grease.
Replace.
Replace.
Replace.
Replace.
Tighten or replace
s - Every 500 hours
Freq.
v
n
n
l
l
v
v
l
v
v
v
s
v
l
n