MULTIQUIP G4100105 Operation And Parts Manual
  1. Manuals
  2. Brands
  3. MULTIQUIP Manuals
  4. Lighting Equipment
  5. G4100105
  6. Operation and parts manual
MULTIQUIP G4100105 Operation And Parts Manual

MULTIQUIP G4100105 Operation And Parts Manual

Lighting system
Hide thumbs Also See for G4100105:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION AND PARTS MANUAL
GloBug
MODEL GB43LED
LIGHTING SYSTEM
SERIAL NO. G4100105 AND ABOVE
Revision #2 (10/28/21)
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

Advertisement

Table of Contents
loading

Related Manuals for MULTIQUIP G4100105

Summary of Contents for MULTIQUIP G4100105

  • Page 1 OPERATION AND PARTS MANUAL GloBug MODEL GB43LED LIGHTING SYSTEM SERIAL NO. G4100105 AND ABOVE Revision #2 (10/28/21) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
  • Page 2 We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,...

  • Page 3: Proposition 65 Warning

    PROPOSITION 65 WARNING PAGE 2 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)

  • Page 4: Table Of Contents

    TABLE OF CONTENTS GB43LED Lighting System Component Drawings Nameplate and Decals ........30–31 Proposition 65 Warning ........... 2 Base Plate Assembly ........32–33 Table of Contents ............. 4 LED Lamp Assembly ........34–35 Safety Information ..........5–9 Front Cover Assembly ........36–37 Specifications ............

  • Page 5: Safety Information

    SAFETY INFORMATION Do not operate or service the equipment before reading Potential hazards associated with the operation of this the entire manual. Safety precautions should be followed equipment will be referenced with hazard symbols which at all times when operating this equipment. may appear throughout this manual in conjunction with Failure to read and understand the safety safety messages.
  • Page 6 „ NEVER use accessories or attachments that are not „ NEVER operate this equipment when not recommended by Multiquip for this equipment. Damage feeling well due to fatigue, illness or when to the equipment and/or injury to user may result.
  • Page 7 SAFETY INFORMATION LIGHTING SYSTEM SAFETY LAMP SAFETY WARNING WARNING „ NEVER disconnect any emergency or safety devices. „ NEVER attempt to replace lamp with the power on. These devices are intended for operator safety. Always unplug the power cord from the generator or Disconnection of these devices can cause severe injury, power source when changing the lamp.
  • Page 8 SAFETY INFORMATION GENERATOR SAFETY Power Cord/Cable Safety If using a generator to power lighting system, DANGER refer to applicable generator manual safety „ NEVER let power cords or cables lay in water. information section. „ NEVER use damaged or worn cables or cords. Inspect ELECTRICAL SAFETY for cuts in the insulation DANGER...
  • Page 9 SAFETY INFORMATION „ Use one point suspension hook and lift straight upwards. LIFTING HOOK LIFTING HANGER LIFTING SHACKLE GENERATOR LIFTING BALE FORK LIFT ALIGNMENT ARROWS (4 PLACES) „ Never allow any person or animal to stand underneath the equipment while lifting. „...

  • Page 10: Specifications

    SPECIFICATIONS Table 1. Specifications Model GB43LED Input Voltage 120 VAC Max. Current 11 Amps Frequency 60 Hz Appropriate Generator 2,500 Watts Wind Stability with Generator 40 mph (64.37 kph) Weight (less generator) 316 lbs. (143.33 kg) Lamp Lamp Type Four 300W LED Lamp Material Polycarbonite Spotlight Lumens...

  • Page 11: Dimensions

    DIMENSIONS J （ lamp stand reclined） Figure 1. Dimensions Table 2. Dimensions Reference Dimension Reference Dimension Letter in (mm) Letter in (mm) 41.7 (1060) 34.6 (878) 29.9 (760) 61.0 (1550) 63.0 (1600) 43.7 (1110) 31.5 (800) 40.9 (1040) 3.9 (100) 29.1 (740) 80.3 (2040) - 207.1 (5260) Ø...

  • Page 12: Footcandle Plot

    FOOTCANDLE PLOT irradiation angle : 60 degrees footcandles (ft) illuminance (footcandles) distance(ft) 31.6 41.7 53.6 68.4 93.1 117.4 Figure 2. Footcandle Plot PAGE 12 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)

  • Page 13: General Information

    GENERAL INFORMATION The Multiquip GloBug model GB43LED is a compact The GloBug GB43LED has the following features: 1,200W LED mobile cart lighting solution that supports „ Highly efficient LED lamps produce clean, clear light and multiple lighting solutions such as: indoor/outdoor deliver 40,000 hour service life.

  • Page 14: Components

    COMPONENTS Figure 3. Major Components PAGE 14 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
  • Page 15 COMPONENTS 14. Brake Pad — When the brake pedal is pressed, this Figure 3 shows the location of the controls and components for the GloBug GB43LED. The functions of each control is pad will strike and hold the rear tires in place. Make described below: sure rear tires are inflated to the correct air pressure.

  • Page 16: Setup

    SETUP 3. Lift up on each outrigger (2) from its stow position, CAUTION rotate backwards and place it in the deployed position, Please read this entire manual carefully as shown in Figure 6. The outriggers will automatically before attempting to operate the GB43LED. lock in place once they touch the ground.
  • Page 17 SETUP TURNING LIGHTS INDIVIDUALLY 2. Pull up the light stand to raise it and push down the fold lever to lock the lamp stand (Figure 8). 1. Hold the arm of the lamp and turn it to the desired direction (Figure 10). FOLD LEVER Figure 10.
  • Page 18 SETUP ADJUSTING HEIGHT OF THE LIGHTING UNIT 2. Turn the handle of the mast winch clockwise to raise the lighting unit and turn the handle of the mast winch counterclockwise to lower the lighting unit (Figure 12). DOWN WINCH HANDLE Figure 12.

  • Page 19: Operation

    OPERATION APPLYING POWER 4. Lamp operations are controlled by (2) ON/OFF toggle switches located on the Main Switch Box (Figure 14). 1. Make sure both lamp switches (Figure 13) are in the The left lamp switch controls both upper lamps, and OFF position.

  • Page 20: Storage

    STORAGE PREPARATION FOR STORAGE 4. Push down the lamp stand (Figure 17). Some force is required when pushing down because of the installed 1. Using the mast winch (Figure 12), lower the mast fully. springs. Turn winch handle counterclockwise to lower mast. PUSH DOWN 2.
  • Page 21 STORAGE 6. To unlock outriggers, push downward on the counter- 8. Press down on the top of the brake pedal (Figure 22) weight lever indicated by arrow (Figure 19). and hold, then release. This action will disengage the brake mechanism and allow the GB43LED to be moved.

  • Page 22: Maintenance

    MAINTENANCE L2 L4 PAGE 22 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
  • Page 23 MAINTENANCE Table 3. Maintenance Chart Location Part Symptom Solution Freq. Cable Gland Loose? Screw tightly. ❖ Tighten or connect Pin Terminal Loose or disconnected? ■ securely. Too loose or too tight? Tighten correctly. ■ Lamp Hinge for Lamp Stand Hinge does not move smoothly? Apply grease.

  • Page 24: Troubleshooting

    TROUBLESHOOTING Troubleshooting ( LED Lamps) Symptom Possible Problem Solution Are couplers not securely connected? Connect coupler correctly. Is generator lamp switch turned off? Turn on switch. Are connectors not properly Connect disconnected contactor. connected? Are any other electric appliances Lamp does not light. (other than light tower) plugged into Unplug all other appliances.
  • Page 25 TROUBLESHOOTING Troubleshooting (Mast) Symptom Possible Problem Solution Is cable caught in mast? Set cable free. Is end of wire rope disconnected from winch? Connect wire rope to winch. Mast cannot be raised. Does surface of mast not slide smoothly? Apply grease to sliding surface of mast. Is winch handle being turned in the wrong Operate correctly.

  • Page 26: Wiring Diagram

    WIRING DIAGRAM WHITE GREEN GREEN WHITE GREEN GREEN WHITE WHITE BLACK2 BLACK1 WHITE GREEN GREEN BLACK3 GREEN BLUE BLACK GREEN GREEN YELLOW BLUE SWITCH 2 GREEN YELLOW WHITE BLACK WHITE WHITE BLACK3/BLUE BLACK BLUE BLACK BLACK SWITCH 1 WHITE WHITE BLACK2 BLACK BLACK1...

  • Page 27: Explanation Of Code In Remarks Column

    A blank entry generally indicates that the item is not sold “Not Sold Separately” — Indicates that an item cannot separately or is not sold by Multiquip. Other entries will be purchased as a separate item and is either part of an be clarifi ed in the “Remarks”...

  • Page 28: Suggested Spare Parts

    SUGGESTED SPARE PARTS GB43LED GLOBUG 1 to 3 units Qty. Description 3....A000061900 ..LED 300W LIGHTING UNIT( R) 3....A000062000 ..LED 300W LIGHTING UNIT( L) 1....A000060600 ..COVER NOTICE Part numbers on this Suggested Spare Parts list may supersede/replace the part numbers shown in the following parts lists.

  • Page 29: Nameplate And Decals

    NAMEPLATE AND DECALS (two sides) MODEL SERIAL NO. ELECTRICAL SHOCK HAZARD / RISQUE DE DÉCHARGE ÉLECTRIQUE To prevent electrical shock or electrocution, the generator MUST be connected to an earth ground. (See NEC Article 250) Pour éviter tout choc électrique ou électrocution, le générateur DOIT être branché...
  • Page 30 NAMEPLATE AND DECALS NO. PART NO. PART NAME QTY. REMARKS A400498700 DECAL; WARNING, LAMP STAND HAZARD, CSA A400501900 DECAL; GREASE INLET, CSA A400499000 DECAL; DANGER, GLOBUG INFORMATION, CSA A400498900 DECAL; DANGER ELECTRIC SHOCK (GLOBUG), CSA A400498800 DECAL; WARNING, LIFT HANGER, CSA A400261700 DECAL;...
  • Page 31 BASE PLATE ASSY. PAGE 32 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
  • Page 32 BASE PLATE ASSY. PART NO. PART NAME QTY. REMARKS A400166400 LOCKING CLAMP 0013512025 BOLT AND WASHER, M12X25 0043112000 WASHER, M12 0033112000 NUT, M12 0013106010 BOLT, M6X10 A100147100 PLATE, BALLAST 0013510025 BOLT AND WASHER, M10X25 GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21) — PAGE 33...
  • Page 33 LED LAMP ASSY. PAGE 34 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
  • Page 34 LED LAMP ASSY. PART NO. PART NAME QTY. REMARKS A100117700 SPOT LAMP BRACKET, RIGHT ......2....S/N G4100106 AND BELOW A100117002 SPOT LAMP BRACKET, RIGHT ......2....S/N G4100107 AND ABOVE A100113402 SPOT LAMP BRACKET, LEFT ......2....S/N G4100106 AND BELOW A100117002 SPOT LAMP BRACKET, LEFT ......2....S/N G4100107 AND ABOVE 0025005010 COUNTERSUNK SCREW M5x10 0034116000...
  • Page 35 FRONT COVER ASSY. PAGE 36 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
  • Page 36 FRONT COVER ASSY. PART NO. PART NAME QTY. REMARKS A000060600 FRONT COVER ASSY. A000060701 HEAT SINK ASSY. A000060905 POWER UNIT ASSY. 0025004010 COUNTERSUNK SCREW M4X10 A300403201 CABLE (4-SPOT) COMPLETE A100110601 ARM BRACKET 0017206010 BOLT, SOCKET HEAD SUS M6X10 0017105030 BOLT, SOCKET HEAD SUS M5X30 0043116000 BOLT, SOCKET HEAD SUS M6X16 A300328800...
  • Page 37 CABLE AND SWITCH ASSY. PAGE 38 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
  • Page 38 CABLE AND SWITCH ASSY. PART NO. PART NAME QTY. REMARKS A300335000 CABLE (MAIN GB43LED) CP A400401800 WIRE (JOINT) 3 CP A400401900 WIRE (JOINT) 4 CP A400402000 WIRE (JOINT) 5 CP A400402100 WIRE (JOINT) 6 CP E000153700 SWITCH, WASHER 0023304012 BOLT AND WASHER, M4X12 E000153400 SWITCH A300334701...
  • Page 39 MAIN MAST ASSY. PAGE 40 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
  • Page 40 MAIN MAST ASSY. PART NO. PART NAME QTY. REMARKS A100028105 FIRST MAST 0013510025 BOLT AND WASHER, M10X25 1011000701 WINCH HM-G103 1642001430 GROMMET 0043112041 WASHER, 12DX40DX3.2 0013512025 BOLT AND WASHER, M12X25 0013112040 BOLT, M12X40 0033112000 NUT, M12 1052001710 HANGER 0043212000 WASHER, LOCK M12 0043112000 WASHER, M12 1711080130...
  • Page 41 T-HANDLE ASSY. PAGE 42 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
  • Page 42 T-HANDLE ASSY. PART NO. PART NAME QTY. REMARKS A200023001 HANDLE ............1....INCLUDES ITEMS W/# 1102700130 HANDLE GRIP 0040730000 SNAP RING 1503300130 SLEEVE BEARING, 30DX34DX20 A100018906 BASE PLATE A300087403 SIDE GUARD 0013508015 BOLT AND WASHER, M8X15 GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21) — PAGE 43...
  • Page 43 STEERING ASSY. PAGE 44 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
  • Page 44 STEERING ASSY. PART NO. PART NAME QTY. REMARKS A200022903 FRONT SHAFT (L) A200022803 FRONT SHAFT (R) 2001200313 BRAKE PEDAL 2071214010 BRAKE 2071213211 BRAKE SHAFT 1041000131 SPRING, BRAKE 011208030 BOLT, M8X30 SUS ..........1....REPLACES P/N 0010308030 0033108000 NUT, M8 0043108000 WASHER, M8 0013212075 BOLT, M12X75 1521120131...
  • Page 45 OUTRIGGER ASSY. 45 35 31 29 43 45 43 30 31 PAGE 46 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
  • Page 46 OUTRIGGER ASSY. PART NO. PART NAME QTY. REMARKS 0033116000 NUT, M16 1641000330 RUBBER FOOT 0013510025 BOLT AND WASHER, M10X25 A200015203 OUTRIGGER (L) ..........1....INCLUDES ITEMS W/$ A200015303 OUTRIGGER (R) ..........1 ....INCLUDES ITEMS W/$ A100011501 BRACKET (OUT, R) L A100011601 BRACKET (OUT, R) R 2031320213 WEIGHT (OUT, R) L 2031321113...
  • Page 47 MAST ADAPTER ASSY. PAGE 48 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
  • Page 48 MAST ADAPTER ASSY. PART NO. PART NAME QTY. REMARKS 0023304012 SCREW AND WASHER (M4 X 12) A100037300 LAMP STAND COMPLETE (OVAL LAMP) ..1....INCLUDES ITEMS W/% 1643000110 FREE BUSH 1045000130 SPRING (LEVER) 1652000131 END CAP A300093000 SPRING (LAMP STAND) L A300092600 SPRING (LAMP STAND) R 0010308030 BOLT (M8 X 30)
  • Page 49 MAST SECTION ASSY. PAGE 50 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)
  • Page 50 MAST SECTION ASSY. PART NO. PART NAME QTY. REMARKS 1031041010 WIRE ROPE COMPLETE A200030801 FOURTH MAST COMPLETE 2012263010 BRACKET(PULLEY) 3 COMPLETE 0025004010 SCREW (M4X10) 0025004006 SCREW (M4X6) A200030700 THIRD MAST COMPLETE A200027200 SECOND MAST COMPLETE 2002262010 BRACKET(PULLEY) 2 COMPLETE GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21) — PAGE 51...
  • Page 51 We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,...

This manual is also suitable for:

Gb43led

Table of Contents