MULTIQUIP GLOBUG GBX24S Operation Manual page 25

Rotating and Tilting the Lamps
1. Hold the arms of the individual lamp and rotate it to
the desired direction (Figure 12). It is not necessary
to loosen the nut to turn the lamps.
ARM
Figure 12. Rotating a Lamp
2. To tilt the lamp to a desired angle, hold the individual
lamp and tilt (Figure 13).
LAMP
Figure 13. Tilting a Lamp
CAUTION
When tilting the lamp, keep fingers clear of the pinch
points to prevent injury.
Tilting the Lamp Stand
NOTICE
The generator does not need to be running in order to
operate the actuator switch and the control panel light.
Turning the ignition key switch to the ON position will
activate these functions.
GBX24S/GBX24B LIGHT TOWER • OPERATION AND PARTS MANUAL — REV. #0 (05/30/19) — PAGE 25
1. GBX24B Only:
a. Unfasten the belt buckle on the protective cover.
b. Remove and fold protective cover into itself at the
top of the balloon and zip the cover (Figure 14).
Figure 14. Removing the Protective Cover
2. Turn the actuator switch on the control panel (Figure 15)
counterclockwise t to tilt the lamp stand up.
Figure 15. Actuator Switch
SETUP
ACTUATOR
SWITCH