Oil Temperature Sensor; Prevention Of Wetness During Heating; Prevention Of Oil Dilution During Defrost - Daikin VRV Inverter K Series Manual

SI-05C.BOOK Page 47 Monday, November 6, 2000 4:13 PM
SiE-05C
1.17 Oil Temperature Sensor (8 and 10 Hp only)

1.17.1 Prevention of Wetness During Heating

1.17.2 Prevention of Oil Dilution During Defrost

<For products produced before July '99>
<For products produced after Aug. '99>
Functions Inverter K Series
Wet operation is prevented by modification of super heating (SH) by oil temperature sensor (R5T).
(Low equivalent pressure = Te)
R5T ≤ Te+10˚C
R5T > Te+10˚C
The unit controls upper limit frequency of the compressor and is designed to prevent oil from being
diluted while defrosting by means of an oil temperature sensor.
R5T ≤ Te+10˚C
R5T > Te+10˚C
Startup subsequent to defrosting is improved by the oil temperature sensor.
R5T ≤ Te+10˚C
R5T > Te+10˚C
The unit controls upper limit frequency of the compressor and is designed to prevent oil from being
diluted while defrosting by means of an oil temperature sensor.
R5T ≤ Te+10˚C
R5T > Te+10˚C
Startup subsequent to defrosting is improved by the oil temperature sensor.
R5T ≤ Te+10˚C
Ta < -12˚C
106Hz+OFF
R5T > Te+10˚C
SH=10˚C
SH=5˚C
(VF010)
INV · 86Hz+STD · ON
INV · 116Hz+STD · ON
INV · 116Hz+STD · OFF (20 min.)
Upper limit release
INV · 86Hz+STD · ON
INV · 116Hz+STD · ON
INV · 116Hz+STD · OFF (20 min.)
116Hz+ON
Ta > -10˚C
Upper limit release
: http://splitoff.ru/tehn-doc.html
Functions
(VF011)
(VF010)
(VF083)
(VF013)
47