SI-05C.BOOK Page 95 Monday, November 6, 2000 4:13 PM
SiE-05C
1.18 Model Change of Centralized Control Devices
The following optional controllers for centralized control will be changed from model A to model B, and will
be an upgrade in terms of the system. The main modifications are as follows.
1.18.1 Main Modifications Changes (Model A to Model B)
Central
Model No.
remote
Appearance
controller
(Outside dimensions and operation
functions are the same.)
No. of units that can be connected
within one control wiring system
Unified
Model No.
ON/OFF
Appearance
controller
(Outside dimensions and operation
functions are the same.)
No. of units that can be connected
within one control wiring system
Schedule
Model No.
timer
Appearance
(Outside dimensions and operation
functions are the same.)
No. of units that can be connected
within one control wiring system
Common
Indoor unit start method
Test Operation Inverter K Series
DCS302A51
DCS301A51
DST301A51
Group start
The control range setting (connector or switch) inside the controller is altered to increase the number of
units that can be connected within one control wiring system.
1
Up to 4
1
: http://splitoff.ru/tehn-doc.html
Test Operation
DCS302B61
Up to 2
DCS301B61
Up to 8
DST301B61
1
Sequential start
95