Wiring Adaptor For Group Electrical Appendices; Part Names And Functions; Wiring To Outside - Daikin VRV Inverter K Series Manual

SI-05C.BOOK Page 374 Monday, November 6, 2000 4:13 PM
Wiring Adaptor
5.2

Wiring Adaptor for Group Electrical Appendices

(KRP4A51 / KRP4A52 / KRP4A53)
The wiring adaptor for group electrical appendices cannot be used in combination with a central remote
controller, unified ON/OFF controller, schedule timer, data station, etc.
<Objective / use>
The wiring adaptor for group electrical appendices is used for turning units on/off and setting temperature
from a remote location, display of operation, and invoking display of malfunction. A single adaptor enables
unified control of groups connected to the remote controller transmission line (N/P).
5.2.1

Part Names and Functions

5.2.2 Wiring to Outside (Host Computer Monitor Panel, Etc.)
Input for Control by Wire as descibed below depending on whether input is "voltage input" or "non-voltage input."
Electric
Appendices (On/Off
Control)
374
Voltage input
No-voltage input
: http://splitoff.ru/tehn-doc.html
Appendix Inverter K Series / PLUS Series
SiE-05C