Receiver Connections
Receiver Rear Panel
Figure 7.
A
B
A
DTP HDMI 4K D Receiver Rear Panel Connectors
Receiver input ports — Connect the opposite end of the twisted pair cable from the
transmitter output connector (see
(see
Twisted Pair Recommendations for DTP Communication
properly wire the
RJ-45 connectors).
ATTENTION:
•
Do not connect these outputs to a telecommunications or computer data
network.
•
Ne connectez pas ces appareils à des données informatiques ou à un réseau
de télécommunications.
DC power input connector — Plug the included external 12 VDC power supply
into either this 2-pole connector (see
power connector) or the power input connector on the transmitter (see Figure 6,
on the previous page).
A
DTP HDMI 4K D Series Transmitter and Receiver • Installation and Operation
POWER
12V
0.8 A MAX
B
on the previous page) to this RJ-45 connector
B
Power Supply Wiring
on page 11 to wire the
on page 10 to
8