Table of Contents
Advertisement
Final Installation
After testing and making any adjustments, do the following:
1.
2.
3.
Transmitter Connections
Transmitter Front Panel
A
B
At the power outlet, unplug the power supply.
NOTE: One power supply can power both the transmitter and the receiver (see
Power Supply Wiring
Mount the transmitter or receiver into the wall box or mud ring, and attach the supplied
decorator-style faceplate to the unit (see
At the power outlet, reconnect the power supply. This powers up both units.
INPUTS
A
B
AUDIO
Figure 4.
DTP HDMI 4K D Transmitter Front Panel Connectors
HDMI input connector — Connect an HDMI cable between this port and the HDMI
output port of the digital video source.
Audio input — Connect an unbalanced stereo audio source to this 3.5 mm mini stereo
jack. Figure 5 shows how to wire the audio plug.
Tip
Left (+)
Ring
Right (-)
Sleeve ( )
Figure 5.
Audio Input Connector Wiring
DTP HDMI 4K D Series Transmitter and Receiver • Installation and Operation
on page 11 and
Ground Loops
figure 2
on page 4).
OVER DTP
RS-232
IR
Tx Rx G Tx Rx
on page 15).
C
6
Advertisement
Table of Contents
