IBM e Server i Series Manual page 33

Notes:
a. When an even number of disk units are added to a mirrored ASP, they
will automatically become mirrored protected.
b. If ASP is mirror protected, disk units must be added in pairs.
__ 44. The Confirm Add Units display appears showing the configuration your
system will have when the add operation completes.
Note: If you have selected the wrong ASP, press F12 to change your
options.
Press the Enter key to continue. The add process will take several minutes
to complete.
__ 45. Press F12 three times to return to the Use Dedicated Service Tools (DST)
display.
__ 46. Select Perform an IPL on the Use Dedicated Service Tools (DST) display.
Press Enter.
__ 47. If you have a printer, print the configuration list. A service representative
may refer to the configuration list in the future.
__ a. You need to sign on with service authority.
__ b. Type strsst on the Main Menu command line.
Press Enter.
__ c. Type your service tools user ID and service tools password on
the System Service Tools (SST) Sign On display.
Press Enter.
__ d. Select Start a service tool on the System Service Tools (SST) display.
Press Enter.
__ e. Select Hardware service manager on the Start a Service Tool display.
Press Enter.
__ f. Press F6 (print the configuration) from the Hardware Service Manager
display.
__ g. To return to the Main Menu, press F3 (Exit) twice and then press
Enter.
__ h. Place the configuration list where you can refer to it in the future.
__ 48. The installation of the disk unit is complete.
__ 49. For information on how to make your disk unit operational, go to the Disk
management topic in the Information Center.
Chapter 3. Install 43xx disk units
27