IBM e Server i Series Manual page 20

14
43xx Disk Unit, 71xx Disk Expansion Unit, 71xx Disk Unit Enclosure V5R3
Press Enter.
__ d. Press Enter on the Confirm Replace of Configured Unit display to
confirm your choice for replacement.
The replacement process may take several minutes to complete.
When the process is complete, the Work with Disk unit recovery
display appears.
__ e. Press F3 (Exit) to return to the Work with disk units display.
__ f. Select Display disk configuration on the Work with disk units display.
__ g. Select Display disk configuration status on the Display Disk
Configuration display.
Mirrored status will show Resuming. When complete, the Mirrored
status will show Active. This process may take several minutes to
complete. You can either monitor this display to completion, or press
F3 (Exit) repeatedly to return to the OS/400 main menu.
__ h. Install the disk unit covers. Align the tabs on the disk unit cover
with the slots in the system unit. Push the cover in until it latches.
__ i. Install or close the system unit or expansion unit front cover.
The replacement of the disk unit is complete.