IBM e Server i Series Manual page 30

__ 17. Does 01 B M V=S appear in the Function/Data display?
__ 18. Look at the Function/Data display on the control panel.
__ 19. Does 01 B V=S appear in the Function/Data display and the Manual mode
__ 20. Press the Power push button that is located on the iSeries control panel.
24
43xx Disk Unit, 71xx Disk Expansion Unit, 71xx Disk Unit Enclosure V5R3
01 B M V=F should appear in the Function/Data display. If it
does not, repeat steps 16a on page 23 through 16q on page 23.
__ r. Go to step 20.
__ Yes: Go to step 20.
__ No: Do the following:
__ a. Press the Increment/Decrement push button until 02 appears
in the Function/Data display.
__ b. Press the Enter push button on the control panel.
__ c. Press the Increment/Decrement push button until B appears in
the Function/Data display.
__ d. Press the Enter push button on the control panel.
__ e. Press the Increment/Decrement push button until M appears in
the Function/Data display.
__ f. Press the Enter push button on the control panel.
__ g. Press the Increment/Decrement push button until S appears in
the Function/Data display.
__ h. Press the Enter push button on the control panel.
__ i. Press the Increment/Decrement push button until 01 appears
in the Function/Data display.
__ j. Press the Enter push button on the control panel.
01 B M S should appear in the Function/Data display. If it does
not, repeat steps 17a through 17j.
__ k. Go to step 20.
indicator (a small hand) illuminated?
__ Yes: Continue with the next step.
__ No: Do the following:
__ a. Press the Mode Select button until the Manual mode indicator
(a small hand) lights up.
__ b. Press the Increment/Decrement push button until 02 appears
in the Function/Data display.
__ c. Press the Enter push button on the control panel.
__ d. Press the Increment/Decrement push button until B appears in
the Function/Data display.
__ e. Press the Enter push button on the control panel.
__ f. Press the Increment/Decrement push button until S appears in
the Function/Data display
__ g. Press the Enter push button on the control panel.
__ h. Press the Increment/Decrement push button until 01 appears
in the Function/Data display.
__ i. Press the Enter push button on the control panel.
01 B S should appear in the Function/Display panel. If it does
not appear, repeat steps 19a through 19i.
There is approximately a 10-second delay before the power-on light comes
on, and data appears in the Function/Data display.