Note: iSeries 825 does not use disk unit covers.
__ 5. Look at the front of the system unit or the expansion unit and determine the
next available position. When you have a system unit with an expansion
unit, fill the slot positions sequentially in the system unit first. If using
logical partitions, go to Plan for logical partitions, in the Information Center,
for specific load source disk unit locations.
__ 6. Follow the steps in "Details: Install 43xx disk units with system power off"
to install the new disk unit.
Details: Install 43xx disk units with system power off
Attention: Disk units are fragile. Handle with care.
__ 1. Find the package that contains the new disk unit assembly and remove it
from the static-protective package. Write the serial number (use the last 4
digits) of the disk unit here ______________ before you install it.
__ 2. Squeeze and pull the handle out toward you and down before you install
the disk unit. If the handle is not all the way down, the disk unit will not
slide into the system unit or the expansion unit.
View video.
Chapter 3. Install 43xx disk units
21