Table of Contents
Advertisement
.
4.4
Parameters
SIPART PS2 PA Manual
A5E00127926--05
NOTE
The respective operating mode (MAN or AUT) of the positioner is
retained when you switch to the diagnostic display, i.e. in automatic
operation the specified setpoint is still used for controlling and in
manual operation the position last reached is retained.
All the parameters of the positioner are listed in this chapter. Figure 59
shows an overview of the parameters.
The parameter name is shown once in plain text and once as it
appears in the display. The function of the parameter is described
briefly in the "Function" column. In addition, the possible parameter
values, the physical unit and the factory setting of the parameters are
shown.
The configuration block diagram (figures 60 page 99) shows the
effects of the parameters.
Operation
97
Advertisement
Table of Contents
