Table of Contents
Advertisement
Installing the Servers in a Rack With
Express Rails
Note – Ensure that you have all of the parts in the rackmount kit before you begin
the installation of the server.
The rackmount kit contains two slide rail assemblies, which can be installed on
either the right or left side of the rack.
A slide rail assembly consists of two parts, a slide rail and a removable mounting
bracket. The slide rail attaches to the rack posts. The mounting bracket attaches to
the server chassis.
To Install the Slide Rail Assemblies
▼
1. Pull both mounting brackets completely out of their respective slide rails.
a. Simultaneously press and hold the upper and lower lock buttons of the
slide rail lock (
).
FIGURE C-3
Appendix C
Installing the Servers With the Express Rail Rackmounting Kit
71
Advertisement
Table of Contents
