Server Connections
FIGURE 3-1
4. (Optional) Connect an Ethernet cable between the server's Net MGT port
(
FIGURE 3-1
will be made.
After the initial configuration of the system using the SP SER MGT port,
communication with the SP and host is usually performed through this Ethernet
interface.
5. Connect an Ethernet cable between one of the server's NET ports (
and the network to which the server will communicate.
6. Plug the power cords into the power supplies and into a power source.
40
SPARC Enterprise T5140 and T5240 Servers Installation Guide • February 2008
SER MGT
RJ-45
RJ-45 to DB-25
crossover
RJ-45 to DB-9
crossover
) and the network to which future connections to the SP and host
NET MGT
NET 0 to NET 3
RJ-45
RJ-45
Host to Ethernet
SP to Ethernet
adapter
adapter
Terminal
device
)
FIGURE 3-1