Table of Contents
Advertisement
2. Attach a mounting bracket to the right side of the server chassis.
a. Position the mounting bracket against the chassis (
FIGURE C-5
b. Ensure that the heads of the four locating pins protrude through the keyed
c. Verify that all four locating pins are trapped in the keyed openings and that
3. Attach the second mounting bracket to the left side of the server chassis.
4. Orient slide rails, ensuring that the ball bearing tracks (labeled FRONT) are
forward (
74
SPARC Enterprise T5140 and T5240 Servers Installation Guide • February 2008
the slide rail lock is at the front and the keyed openings on the mounting
bracket are aligned with the locating pins on the side of the chassis.
Attaching an Express Rail Mounting Bracket to the Chassis
openings in the mounting bracket. Slide the mounting bracket toward the
front of the chassis until the bracket locks into place with an audible click.
the third from the front locating pin has engaged the mounting bracket lock
(
).
FIGURE C-5
).
FIGURE C-6
). Ensure that
FIGURE C-5
Advertisement
Table of Contents
