Table of Contents
Advertisement
Attaching a Mounting Bracket to the Chassis (Either Server)
FIGURE 2-4
b. Ensure that the heads of the locating pins protrude though the keyed
openings in the mounting bracket. Pull the mounting bracket toward the
front of the chassis until the bracket locks into place with an audible click.
c. Verify that all locating pins are trapped in the keyed openings and that the
correct locating pin has engaged the mounting bracket lock. See the right
side of
FIGURE 2-4
3. Attach the second mounting bracket to the left side of the chassis.
4. Determine which rack hole numbers to use when attaching the slide rails to
the rack posts.
If the server is two rack units high (2U), the slide rails occupy the lower half of
the 2U space.
5. Determine which screws you will use to mount the slide rails.
If your rack has threaded mounting holes in the rack posts, determine
■
whether the threads are metric or standard. Select the appropriate screws
from the package included in the mounting kit.
Chapter 2 Installing the SPARC Enterprise T5140 and T5240 Servers
.
19
Advertisement
Table of Contents
