Booting The Solaris Operating System - Fujitsu Siemens Computers SPARC Enterprise T5140 Installation Manual

Disk Slot Numbers, Logical Device Names, and Physical Device Names (Continued)
TABLE 3-1
Disk Slot Number Logical Device Name
Slot 1
c0t1d0
Slot 2
c0t2d0
Slot 3
c0t3d0
* The logical device names might appear differently on your system, depending on the number and type of add-on disk controllers
installed.
Device Identifiers and Devices
TABLE 3-2
Device Identifiers
/SYS/MB/CMPcpu_number/Pstrand_number
/SYS/MB/CMPn/RISERn/PCIEslot_number
/SYS/MB/CMPn/RISERn/XAUIcard_number
/SYS/MB/NETnetwork_number
/SYS/MB/PCIE
/SYS/MB/USBnumber
/SYS/MB/CMPn/L2_BANKnumber
/SYS/DVD
/SYS/USBBD/USBnumber
/SYS/TTYA
/SYS/MB/CMPn/MRn/BR/branch_number/CHchannel_number/Ddimm_number

Booting the Solaris Operating System

The Solaris OS is preinstalled on the servers on the disk in slot 0. The Solaris OS is
not configured (that is, the sys-unconfig command was run in the factory). If you
boot the system from this disk, you will be prompted to configure the Solaris OS for
your environment.
*
Physical Device Name
/devices/pci@0/pci@0/pci@2/scsi@0/sd@1,0
/devices/pci@0/pci@0/pci@2/scsi@0/sd@2,0
/devices/pci@0/pci@0/pci@2/scsi@0/sd@3,0
Devices
CMP (0-1) CPU strand (0-63)
CMP (0-1) Riser (0-1) PCIe
slot (0-5)
CMP (0-1) Riser (0-1) XAUI
card (0-1)
Network interfaces (0-3)
PCIe root complex
USB ports (0-1, located on
rear of chassis)
CMP (0-1) Bank (0-7)
DVD
USB ports (2-3, located on
front of chassis)
DB9 Serial Port
CMP (0-1) Riser (0-1) Branch
(0-1) Channel (0-1) DIMM
(0-3)
Chapter 3 Powering On the System 55