Fujitsu Siemens Computers SPARC Enterprise T5140 Installation Manual page 95

The removable mounting bracket slides 14.5 in. (37 cm) out of the slide rail, then
■
locks in place. If you unlock the mounting bracket at this point, it slides an
additional 14.5 in. (37 cm) before separating from the slide rail. You can then
mount the mounting bracket to the right or left side of the server chassis.
Note that there are a total of six locks (
■
are on the mounting bracket. Two locks are on the slide rail. The uses of these
locks are described in the following installation procedure.
Appendix C
FIGURE C-2
Installing the Servers With the Express Rail Rackmounting Kit
) in a slide rail assembly. Four
69